Headlamp polishing set for home use
The headlamp polishing kit is a practical and easy -to -use solution for maintenance of cars headlights. Over time a headlamp lens often turn yellow, oxidize or scratch, which worsens their light permeability and reduces the leading visibility, especially at night or in bad weather. With this headlamp refurbishment set, you can restore the light of the headlamps and the light, thus increasing the aesthetic appearance and safety of the car.
Why use it?
During the time of the cars headlights, it not only worsens the appearance, but also directly influences driving safety. Faby headlights cause reduced visibility, which increases the risk of accidents. The headlamp polishing kit provides an effective solution to this problem. The set includes all the necessary toolsto restore the original transparency of the headlamps, removing the accumulated dirt, scratches, yellowing and oxidation.
Use:
Preparation: Clean the headlamp lens with water. Cover the surface around the lens to avoid scratches on nearby painted surfaces.
Step 1 - sanding: Moisten the abrasive disc and secure it to the back. Grind with three different particles of particle to remove strong yellowing, fading, and corrosion. Comment: Use grinding discs from coarse to fine: P800 → P1200 → P2000. Failure to do so will result in failure to recover.
Step 2 - Polishing: Fix the orange sponge disc to the back and apply the polishing paste. Polish the lens until the light returns to its original state. Comment: For best results, use an electric abrasive or polishing machine. For manual polishing, polish at least 200 circular motion clockwise.
Step 3 - Protection: Clean the headlamp lens and make sure the lens is dry before continuing this step. It is very important that the headlamp is not exposed to direct sunlight. Place 5-10 drops of surface protection on the cleaning cloth, then apply it alternately to the headlamp lens horizontally and vertically and be careful to apply the liquid evenly. Allow to dry for 3-5 minutes, then wipe the excess liquid. Wait 24 hours for complete hardening or use a hairdryer for 1-2 minutes.
Attention! You can trigger an allergic skin reaction. You can irritate the skin, nose and throat. Avoid access to the eye. Do not get on skin or clothing. Avoid inhalation of vapors. Use it only with proper ventilation. Do not swallow. If the eyes are touched, rinse with plenty of water. If the skin is touched, wipe and wash with soap and water. If inhaled, go to fresh air. Do not vomit and seek medical attention when ingestion. If irritation persists after self -treatment, seek medical attention immediately. To keep children away.
