Trapezoid lift in 1T, 1.5T and 2T
A trapezoid lift is an indispensable tool for all motorists when you need to lift a vehicle, whether it is wheel change or minor repairs. Thanks to its compact design, it is easy to transport and easy to use while providing reliable stability. By design, it allows for a steady and secure lifting, making it a reliable companion in the long run for all vehicle owners.
The product can be achieved in three different designs for each user to find the right version. Models with 1T, 1.5T and 2T lifting capacity have different sizes and capacity, so they are recommended for different vehicles. The 1T model is ideal for smaller passenger cars, 1.5T lifting for medium-sized vehicles, and the 2T version is ideal for heavier, up to 2000 kg vehicles.
The structure is made of strong steel, which guarantees durability and reliability. The trapezoidal screw mechanism provides a steady and stable lifting, minimizing effort during use. The non -slip lifting surface provides extra security to keep the vehicle properly at the lifting points.
The lift is also outstanding from a safety point of view. Before use, always make sure you work on a stable, flat ground and secure the vehicle properly. During the operation, no one should stay in the car and always check the tightness of the fastening screws after swap.
Technical data for different designs:
Trapeze lift 1T
-
Maximum load capacity: 1000 kg (1T)
-
Minimum lifting height: 88 mm
-
Maximum lifting height: 383 mm
-
Length: 426 mm
-
Net/gross mass: 2.5 kg / 2.8 kg
-
Packaging sizes: 505x455x255 mm
-
Quality Certificates: Tuv, ce
Trapeze lift 1.5T
-
Maximum load capacity: 1500 kg (1.5T)
-
Minimum lifting height: 100 mm
-
Maximum lifting height: 380 mm
Trapeze lift 2T
-
Maximum load capacity: 2000 kg (2T)
-
Minimum lifting height: 100 mm
-
Maximum lifting height: 370 mm
-
Dimensions:
- Length: 425 mm
- Width: 95 mm
- Folded: min. 100 mm
- Opened: max. 370 mm
-
Lifting height: min. 150 mm, max. 350 mm
-
Security Certificates: EN 1494: 2000 + A1: 2008, EN ISO 14121-1: 2007
WARNING
1. Raise, if possible, on solid, horizontal, hard soil.
2. For defect, select a safe, traffic -free area to replace the wheel.
3. Stop the engine, use the spatially prescribed jam and warning.
4. Fix the vehicle safely (handbrake, gearbox).
5. During the operation, passengers should not stay in the vehicle.
6. Loosen the wheel screws before lifting. Apply the lift at the prescribed and marked point.
7. After replacing the wheel, tighten the wheel screws only after lowering the lift.
8. In each case, check the screws after making a few km.
